CO2 Fire Extinguishers in Surat

A CO2 extinguisher is rated for Class B (flammable liquids) and Class C (electrical) fires. The extinguishing agent is carbon dioxide, which displaces oxygen and smothers the fire while leaving no residue — making CO2 units the standard choice for electrical, server-room, instrumentation, substation and switchgear areas where a powder residue would damage equipment. We supply BC CO2 stored-pressure units (9 kg) and BC CO2 cartridge-type trolley units (25 kg, 50 kg, 75 kg) for Surat sites.

We supply four BC CO2 capacities. The 9 kg stored-pressure unit is the standard wall-mounted unit for server rooms, electrical rooms, switchgear and commercial kitchens. The 25 kg, 50 kg and 75 kg cartridge-type trolley units are wheeled, high-capacity units rated for high-hazard zones such as fuel depots, chemical storage, refineries and offshore-adjacent sites. The 9 kg unit is IS 15683-certified; the larger cartridge-type units are IS 16018 / IS 2190-certified.

Yes for confined spaces where the protected equipment cannot tolerate powder residue — typically server rooms, data centres, electrical substations, instrumentation panels and commercial kitchens. CO2 displaces oxygen, so discharge in a small unventilated enclosed space can pose an asphyxiation risk to the operator; placement and operator briefing should account for this. We include a brief operational walkthrough as part of the supply engagement so your staff understand the safe operating envelope.

Stored-pressure CO2 units (the 9 kg capacity in our catalog) carry the propellant gas inside the cylinder alongside the agent, ready to discharge on valve operation. Cartridge-type units (the 25 kg, 50 kg, 75 kg capacities in our catalog) store the CO2 propellant in a separate internal or external cartridge that is punctured at the point of use — this allows much larger agent capacities on a trolley-mounted body for high-hazard zone coverage. Stored-pressure units are wall-mounted; cartridge-type units are wheeled.

Yes. CO2 refilling covers cylinder and valve inspection, weighing to verify the charge weight, and recharging to the correct charge. The 9 kg stored-pressure units are typically refilled on-site or at our workshop; the 25 kg, 50 kg and 75 kg cartridge-type trolley units are handled at our workshop with the refilled units returned to your Surat site. See the fire extinguisher refilling in Surat page for the full refilling workflow.

It depends on the fire risk in each protected zone. ABC dry powder is the standard general-purpose extinguisher for offices, corridors, workshops and storage — it covers Class A, B and electrical risks but leaves a powder residue. CO2 is preferred for electrical, server, instrumentation and switchgear areas where residue would damage equipment, and for flammable-liquid hazards (fuel depots, chemical storage) where the larger cartridge-type trolley units are used. Most Surat industrial sites run a mixed fleet — ABC for general coverage plus CO2 for sensitive and high-hazard zones. We propose the right mix after reviewing your site fire-load.