FSPA, FSCA and FSCR: The Gujarat Fire Safety Certificate Process
A listed building in Gujarat goes through three stages on the Gujarat Fire Safety Compliance Portal. FSPA (Fire Safety Plan Approval) is decided within 21 days and comes before development permission. FSCA (Fire Safety Certificate Approval) is applied for in Form B14 before the building is occupied, decided within 21 days, and valid for three years. FSCR (renewal) is issued by a Fire Safety Officer in Form B13.3 and valid for two years.
- FSPA decision
- Within 21 days
- FSCA decision
- Within 21 days
- First certificate
- Valid 3 years
- Renewal
- Valid 2 years, apply 2 months before expiry
The process at a glance
| Stage | Form or output | Time | Valid for |
|---|---|---|---|
| Step 1: FSPA, plan approval | Application in Annexure 1; approval letter in Annexure 2; rejection in Annexure 3 | Scrutiny within 21 days | Needed before development permission |
| Step 2: FSCA, certificate approval | Application in Form B14; certificate in Form B13; rejection in Annexure 4 | Scrutiny within 21 days | 3 years |
| Step 3: FSCR, renewal | Fire Safety Officer issues Form B13.3; rejection in Annexure 6 | Apply at least 2 months before expiry | 2 years, and 2 years each time after |
Step 1: Fire Safety Plan Approval (FSPA)
- It applies to anyone seeking development permission for a building listed in the Third Schedule.
- The application (Annexure 1) goes to the Regional Fire Officer or the Chief Fire Officer with the fee, the documents and plans showing the minimum requirement, the capacity and the location of the fire prevention, life safety and fire protection measures.
- It must be countersigned by the owner, builder or developer and by the Licensed Agency, the architect on record, the engineer on record or the structural engineer on record.
- The plans include the layout showing fire vehicle access, elevation, section, and typical floor plans showing occupant load, exit capacity, travel distances, compartmentation and a line drawing of the fire protection systems, along with the checklist for the building category.
- The authority scrutinises the application within 21 days and either issues the approval letter (Annexure 2) or rejects it with reasons (Annexure 3). The town planning authority can then grant development permission.
Step 2: Fire Safety Certificate Approval (FSCA)
- Before the building is occupied or used, the owner or occupier applies in Form B14 with the fee.
- Three self-certifications go with the application: (a) the fire safety measures will be maintained as approved and not altered without approval (Annexure 13); (b) an annual maintenance contract (AMC) is in place for the fire protection equipment and systems (Annexure 14); (c) the electrical installations are safe (Annexure 15).
- If the building as built differs from the approved plan, the plan must be approved again, with a fresh FSPA fee, before the FSCA application is processed.
- The authority scrutinises the application within 21 days, including a site visit, inspection and testing. It then issues the certificate in Form B13 or rejects the application (Annexure 4).
- The certificate is valid for three years unless cancelled (Rule 24, Regulation 5.7). The Regional Fire Officer or Chief Fire Officer can reduce the period after recording reasons.
Step 3: Renewal (FSCR)
- The owner or occupier appoints an enrolled Fire Safety Officer (FSO) from the list on the portal. The Act requires the appointment at least two months before the certificate expires, and the 2024 amendment to Rule 25 requires the renewal application at least two months before expiry.
- The FSO inspects. If the measures are in good repair and efficient working condition and the self-certifications are submitted, the FSO issues the renewal in Form B13.3, valid for two years, and for two years each time after. Since the June 2024 amendment, the FSO uploads the findings to the portal and the Regional or Chief Fire Officer verifies them before the renewal is issued online.
- If the FSO finds major non-compliance, the renewal is rejected (Annexure 6) and the owner and the fire authority are told.
- If no FSO is appointed, the fire authority can act, or ask the competent authority to discontinue use or close the building (Regulation 7.8, section 12(4) of the Act and Rule 21(3)).
Read more in the renewal guide and the Fire Safety Officer guide.
Declarations and drills during validity
- Annual declaration (Form B2): the Licensed Agency, or the owner, occupier or developer if no agency is appointed, declares that the measures are operational. It is filed within 15 days of completing the first and second year of the certificate.
- Six-monthly declaration cum inspection report (Form B15): filed by the FSO after each renewal and uploaded to the portal.
- Emergency mock drills: held twice a year by the FSO, with a record kept (checklists in Annexures 11 and 12).
- In a building with more than one occupier, the society or association of occupiers is responsible for maintaining the fire safety measures (Rule 26(5)).
Fees, late fees and appeals
Fees depend on the building category. See our fee and late-fee calculator. If an FSPA, FSCA or renewal is rejected, you can appeal to the Director through the portal within 15 days, with a fee of 50 percent of the respective application fee. After 15 days you need a fresh application and fee.
If the portal's formats differ from the annexures in the Regulations, the portal prevails (Regulation 30).
Common questions
How long does the Gujarat fire safety certificate take?
The authority has to scrutinise an FSPA application and an FSCA application within 21 days each.
What is the annual maintenance contract for?
The FSCA application includes a self-certification that an annual maintenance contract is in place for the fire protection equipment and systems (Annexure 14).
Who can countersign the FSPA application?
Besides the owner, builder or developer, a Licensed Agency, the architect on record, the engineer on record or the structural engineer on record.
More questions? See the fire safety FAQ for short answers on certificates, renewal, penalties, extinguishers and pandals.
Equipment ready for the inspection
At the FSCA and at each renewal, the equipment is inspected and tested. Munshi Fire Safety supplies, refills and services extinguishers and related equipment in Vapi and South Gujarat.
Sources
- Gujarat Fire Prevention and Life Safety Measures Regulations, 2023 (Gazette Extraordinary, 13 December 2023), amended 24 June 2024
- Gujarat Fire Prevention and Life Safety Measures Rules, 2014, with amendments to 2026
- Gujarat Fire Prevention and Life Safety Measures Act, 2013 (Guj. 11 of 2013), as amended in 2021
- Gujarat Fire Safety Compliance Portal (gujfiresafetycop.in)
Facts last verified on 13 November 2026.
This guide is general information, not legal advice. Rules, forms and fees change, and the Gujarat Fire Safety Compliance Portal prevails over any summary. Confirm your case with the fire authority, a Licensed Agency or a lawyer before you act.